Setup Menu - ViewSonic LS710HD User Manual

Setup Menu

Menu
Projection
Power Settings
Projection
Power Settings
Security
HDMI CEC
Test Pattern
Options
Reset
i
Select
Select the preferred projection: Front, Rear, Ceiling-Top, and
Rear-Top.
Direct Power On
Automatically power on the projector when AC power
is supplied, without pressing the Power button on the
projector or the remote control.
Signal Power On
Automatically power on the projector when a signal is
detected, without pressing the Power button on the
projector or on the remote control.
Auto Power Off
A countdown timer will start when there is no signal being
sent to the projector. The projector will automatically power
off when the countdown has finished (in minutes).
Power Mode (Standby)
USB Power (Standby)
Enable or disable the USB power function when the
projector is in standby mode.
Setup
Exit
Description
Mode
Normal standby (> 0.5W) with USB
Active
Power available.
Reduce power use (< 0.5W) with no
Eco
USB power available.
55
Enter
Description