Toshiba TDP-P8 User Manual page 36

Appendices (Continued)
Steady light =>
No light =>
Problem : Image is out of focus
Adjusts the Focus Ring on the projector lens. Refer to page 27.

Make sure the projection screen is between the required distance 5

to 40 feet (1.5 to 12.2 meters) from the projector.
Problem : The image is stretched when displaying 16: 9
DVD.
The projector automatically detects 16:9 DVD and adjusts the aspect
ratio by digitizing to full screen with 4:3 default setting.
If the image is still stretched, you will also need to adjust the aspect
ratio by referring to the following:
Please select 4:3 aspect ratio type on your DVD player if you are

playing a 16:9 DVD.
If you can't select 4:3 aspect ratio type on your DVD player, please

select 4:3 aspect ratio in the on screen menu.
Problem : Image is reversed.
Select "Default setting " from the OSD and adjust the projection

direction. See page 32.
Problem : Lamp burns out or makes a popping sound
When the lamp reaches its end of life, it will burn out and may make

a loud popping sound. If this happens, the projector will not turn on
until the lamp module has been replaced. To replace the lamp, follow
the procedures in the "Replacing the Lamp". See page 38.
Problem: LED lighting message
Message
Standby State
(Input power cord)
Normal Mode
Cooling
Error (Lamp failed)
Error (Fan failed)
Error (Over Temp.)
Error
(Lamp cover failed)
Error
(Color wheel failed)
Power LED
Green Orange
Flashing
37
Temp LED Lamp LED
Red
Flashing
Flashing
Flashing
Flashing