Lifting the Sportjet, Reboarding the Warning Label Locations The Williams Sportjet uses water jet propulsion. If this is your first boat or you are changing to a Sportjet type of boat you are not familiar with, please ensure that, for your own safety you obtain handling General Specifications, Engine and operating experience before assuming command of the boat.
• At least one passenger should be able driver move away from, or be thrown from serviced by an authorized Williams dealer. ensure the safety of his/her passenger(s) and to operate the boat in case the operator is the helm position, the kill cord will detach of other water users.
In case of difficulty consult Be considerate to others you share the • boaters. your Williams authorized dealer. A full list of water with. authorized dealers/engineers is available at • Approach a person in the water from •...
Page 6
Warning Label Locations General Specifications Sportjet model Sportjet general information label Length (OA)* 3.45 m 3.90 m 4.35 m 4.60 m 5.20 m Do not block (bilge blower vent) 1.77 m 1.77 m 1.93 m 2.01 m 2.01 m Beam (OA)* CE plate (Not US) Height (OA) 0.93 m...
General Layout: Sportjet 345, 395 & 435 Sportjet 460 & 520 Indicates seating position Indicates seating position Indicates handholds Indicates handholds Bow cleat/anchor point Bow cleat/anchor point Port/starboard navigation light socket Port/starboard navigation light socket Stowage area (under seat) Splash proof storage (under seat)
Page 8
New Engine Break-in Period Sportjet 345, 395 & 435 Consult your Rotax engine operator’s manual. to a good break-in. Williams suggest that after the first 10 hours of operation, the engine be A break-in period of 10 hours is required...
Before Use Starting Procedure Sportjet 345, 395 & 435 Tube pressure will fluctuate with temperature. • Check bilge for fuel or water contamination. Inflate tubes in sequence to 250 mB/3.6 psi. • Tighten footwell drain plugs. 1 Turn battery isolator on (see page 12).
Engine Bay: Sportjet 345, 395 & 435 Sportjet 460 & 520 This view shows the engine bay looking towards the rear of the boat. This view shows the engine bay looking towards the rear of the boat. Fire extinguisher Power limit switch...
Exhaust System Flushing Sportjet 345, 395 & 435 To prolong engine life it is very important to CAUTION. Always start the engine Footwell drains flush the engine of salt water after use and before opening the water tap. Open Reverse bucket the water tap immediately after the prior to storage.
Overcurrent protection fuses/breakers are rated at 30 amps 12 Music system: 5 amp WARNING. Risk of injury or death. When Williams lifting strops are used and located adjacent to battery isolator. 13 Ignition power please refer to instructions supplied with the strops and adhere to the Safe Working Load...
The fuel system should be serviced only removed. circuit (refer to Exhaust System Flushing as authorized by US Coastguard Grant of by a Williams Tenders, USA inc trained section). Exemption (CGB 17-011). Maintenance certified technician. Do not attempt to BUOYANCY TUBE of the fuel system in this boat should service the system yourself.
Full Inspection Maintenance Table First Every Every To be 50 hours 100 hours 200 hours carried or 1 year or 1 year or 2 years out by Please use this section for servicing guidance and the Rotax engine manual for all engine-related serviceable items.
HOW TO OBTAIN WARRANTY REPAIR: and limitations. Registration of a Williams boat – Each Williams boat is supplied to the original Prior to any work being commenced on a Williams boat, the warranty claim must be approved customer with a registration card.
Need help?
Do you have a question about the SportJet 435 and is the answer not in the manual?
Questions and answers