Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for KERN KDP 10K-3
Summarization of Contents
Basic Information (General)
4.1 Proper Use
Describes the intended use of the weighing platform for determining material weight.
4.2 Improper Use
Details prohibited uses and potential damage from misuse, overloading, or explosive environments.
4.3 Warranty
Lists conditions that will void warranty claims, including ignoring manual instructions or unauthorized modifications.
Basic Safety Precautions
5.1 Pay Attention to Instructions
Emphasizes reading the manual before setup and commissioning for safe operation.
5.2 Personnel Training
States that only trained personnel should operate and maintain the appliance.
Transport and Storage
6.1 Testing Upon Acceptance
Instructs users to check packaging and the appliance for visible damage upon receipt.
6.2 Packaging / Return Transport
Provides guidelines for retaining original packaging and preparing for return transport.
Unpacking and Placing
7.1 Installation Site, Location of Use
Details environmental conditions and placement requirements for accurate weighing results.
7.2 Unpacking and Checking
Guides on removing packaging, checking for damage, and verifying all included items.
7.3 Assembly and Installation
Covers levelling, installing the weighing plate, and connecting to power for accurate weighing.
Connection to Your System
8.1 USB
Instructions for connecting the weighing platform to a computer via USB.
8.2 Bluetooth
Information on using the optional Bluetooth Low Energy (BLE) connection.
8.3 Ethernet
Details Ethernet connectivity, DHCP settings, and communication protocols (UDP, Telnet).
8.4 WLAN
Explains how to configure and connect the weighing platform via WLAN access point.
Carrying Out Measurements
10.1 Using Your Own Software
Covers requesting weight values and zeroing/taring using KCP protocol commands.
10.2 Using the BalanceConnection Software
Details using the KERN BalanceConnection software for configuration and operation.
10.2.1 Functions
Explains pre-configured functions within the BalanceConnection software like Zeroing, Taring, and Print.
Need help?
Do you have a question about the KDP 10K-3 and is the answer not in the manual?
Questions and answers