Adjusting The Projected Image; Raising The Projector Height; Lowering The Projector Height - Dell 1409X User Manual

NOTE:
If you press the Power button while the projector is running, the "Press
Power Button to Turn off Projector" message appears on the screen. To clear the
message, press the Menu button on the control panel or ignore the message; the
message disappears after 5 seconds.

Adjusting the Projected Image

Raising the Projector Height

Press the Elevator button.
1
Raise the projector to the desired display angle, and then release the button to
2
lock the elevator foot into position.
Use the tilt adjustment wheel to fine-tune the display angle.
3

Lowering the Projector Height

Press the Elevator button.
1
Lower the projector, and then release the button to lock the elevator foot into
2
position.
DVI-D In VGA - A VGA - A
Out I
Dell 1409X
3
1
Elevator button
2
Elevator foot
3 Tilt adjustment wheel
16 Using Your Projector
1
VGA - B S-Video In Video In Audio In Audio Out USB RS-232
I Remote
3
2