Epson 1705C - PowerLite XGA LCD Projector Documentation Update page 2

2. Click , then make sure all three programs are selected (including EMP Monitor).
Easy Install
3. Click , then follow the on-screen instructions to install your projector software.
Install
4. When you see the Virtual Display screen, you can select one or more virtual displays to use for
multi-screen projection. Windows lets you use two by default, but you can select up to four
more if you plan to use additional projectors.
Note:
If you select more virtual displays, your computer may slow down—depending on its capabilities.
After you install the software, you can change your Virtual Display selection by accessing
EPSON Projector from the Start menu and selecting Add-Remove EPSON Virtual Display
If you see a message that the Epson Projector Support Driver has not passed Windows Logo testing,
click Continue Anyway. If you have selected multiple Virtual Displays, you will see this message
several times.
5. When installation is complete, click
Windows Vista
Your projector works with Windows Vista. If you install the Epson projector software in a previous
version of Windows and later upgrade to Windows Vista, you must uninstall the software before
you upgrade. Then reinstall it after you are running Windows Vista.
If you are upgrading to Windows Vista and a USB display driver is installed on your computer,
uninstall it before upgrading to Windows Vista.
to close the installation window.
Finish
® Support
2
.