Basic Operations; Power On/Off; Playing Source Selection; Volume Adjustment - ZENEC ZE-MC292 Instruction Manual

THE BASIC OPERATION

POWER ON/OFF

■ Press the POWER /MUTE button on the front panel to turn the unit on. You can also turn
on the unit by pressing the button (
■ Press and hold the POWER /MUTE button on the front panel or press the POWER
button ( ) on the remote control to power off the unit.

PLAYING SOURCE SELECTION

■ Press the SRC button on the front panel or the (SRC) button on the remote control to
change the among available playing sources:
Tuner → DVD → A/V-In → DVB-T → SD-Karte → iPod → Camera (rear view video camera)
→ Navi.
The playing mode is displayed on the TFT display.
■ AUX IN Mode
An external audio/video device can be connected to this unit via RCA cables to the
"AUX-IN".
■ CAMERA Mode
The "CAMERA" mode is only available, if the camera is connected and when backing
up. To install a rear view video camera, connect the CAMERA video input cable to the
rear view camera output cable.

NOTE:
■ If you have not connected a device to the unit, the source can not be selected.
Example: If you have not connected an iPod to the unit, the iPod source will not be
available.

VOLUME ADJUSTMENT

■ To increase or decrease the volume level, press the VOL+/ VOL- buttons on the remote
control or on the front panel. The volume ranges from "0" to "40".
The unit saves the last adjusted volume, before you turn off the unit.

AUDIO CONTROL MENU

■ The audio control feature allows you to easily adjust your audio system to meet the
acoustical characteristics of your vehicle, which vary depending on the type of vehicle
and its measurements. To get the best possible sound quality from your new system,
be sure to adjust the settings for the speakers as well. Proper setting of the fader and
balance boosts the effects of the cabin equalizer.
) on the remote control.
83
ENGLISH