Using The Tft Monitor; Open/Close The Tft Monitor; Tft Monitor Auto Open; Monitor Tilt Angle Adjustment - ZENEC ZE-MC292 Instruction Manual

TFT MONITOR OPERATION
OPEN/CLOSE TFT MONITOR
Press the button on the front zone remote control or press the
[ ]
`
panel to open/close the monitor.

TFT MONITOR AUTO OPEN

■ If "TFT Auto Open" is "On", when the unit is turned on, the monitor automatically open
to the last viewing position.
■ If "TFT Auto Open" is "Off" , when the unit is turned on, press the
remote control or press the
desired viewing position.
■ If "TFT Auto Open" is "Manual", when the unit is turned on or turned off, the monitor has
no movement.
■ See "General setting" for more instructions.

MONITOR TILT ANGLE ADJUSTMENT

e
The monitor angle can be adjusted for optimum viewing using by one of the following methods:
■ Press the button on the front panel to adjust the tilt angle of the screen one step at
a time.
■ Press and hold the
■ Adjust the "Screen Tilt" in the "Screen setting" to adjust the tilt of the screen to the
desired degree.

REAR CAMERA MODE

■ When the vehicle is placed in "Reverse" and an optional rear camera is connected to the
unit, the TFT monitor will automatically switch to the camera input source.

IMAGE SETTING

Video Output Format
■ The table below shows the video output format for each playing source.
Playing source
FM/AM Tuner
CAMERA
iPOD (Video)
SD Card
*CVBS – Composite Video Baseband Signal
e
button on the front panel to open the monitor into the
e
button to continuously adjust the tilt angle.
DVD
DVB-T
NAVI
AUX IN
Video output format
RGB mode
RGB mode
RGB mode
RGB mode
CVBS mode
CVBS mode
CVBS mode
RGB mode
81
ENGLISH
e
button on the front
e
button on the