Setting The Dolby Digital Setup - Denon AVR-983 Operating Instructions Manual

Setting the Video In Assignment
• This setting assigns the color difference (component) video input jacks of the AVR-2803/983 for the different input sources.
1
2
3 Select the component (Y, P
Select "NONE" for sources for which the component (Y, P
When the default, "Yes", is selected, the settings are reset to the factory defaults.
4

Setting the Dolby Digital Setup

Sets the down-mixing method when not using a center speaker or surround speakers.
OFF: The dynamic range is not compressed.
ON: The dynamic range is compressed automatically according to the combination of speakers being used.
1
2
24
At the System Setup Menu select "Video In Assignment".
Switch to the Video In Assignment screen.
/C and P /C ) video input terminal to be assigned to the input source.
B B R R
q Input source selection
ENTER the setting.
The System Setup Menu reappears.
At the System Setup Menu select "Dolby Digital
Setup" and press the ENTER button.
Select "ON" if you want to use the Compression, "OFF" if you do not
want to use it.
NOTE:
When not using a center speaker or surround speakers, the sound is
played from the front speakers. If the sound should seem distorted
because the input level exceeds the allowable input for the front
speakers, set "Compression" to "ON".
/C and P /C ) video input is not to be used.
B B R R
w Component video terminal selection