Related Manuals for KSB ECOLINE GTC
Summarization of Contents
Legal Information and Copyright
Operating Manual
Manual describing proper and safe use of equipment in all operational phases.
Original Operating Manual
Confirms the document is the original operating manual.
Glossary
PED
Definition of the Pressure Equipment Directive (PED) 97/23/EC or 2014/68/EU.
Technical Literature
Reference to product catalogue for technical information at www.ksb.com.
General Information
1.1 Principles
Manual as integral part of type series, describes proper and safe use of equipment.
1.2 Target Group
Manual aimed at trained and qualified specialist technical personnel.
1.4 Symbols
Explanation of symbols used in the manual for instructions and safety.
Safety
2.1 Key to Safety Symbols/Markings
Definition of safety symbols and signal words for hazard identification.
2.2 General Safety Information
Manual contains general instructions for safe valve operation and personal safety.
2.7 Safety Information for Operator/User
Safety guidelines for operators regarding access, protective equipment, and leakages.
2.8 Safety Information for Maintenance, Inspection and Installation
Safety instructions for maintenance, inspection, and installation work on the valve.
Transport, Storage, and Disposal
3.1 Checking Condition Upon Delivery
Procedure for checking packaging units for damage upon goods transfer.
3.2 Transport Safety
Guidelines for safe transport, including suspension and lifting precautions.
3.3 Storage/Preservation
Recommendations for storing valves to prevent damage from dirt, corrosion, and frost.
3.5 Disposal
Instructions for safe dismantling and disposal of valves and associated fluids.
Valve Description
4.1 General Description
Overview of valve design/configuration with reference to type series booklet.
4.2 Marking
Details of general valve marking parameters and CE marking interpretation.
4.3 Globe Valves to ANSI/ASME with Gland Packing
Description of ECOLINE GLC series globe valves, including operating data and design.
4.4 Bellows-type Globe Valves to ANSI/ASME
Description of ECOLINE GLB series bellows-type globe valves, including operating data.
4.5 Gate Valves to ANSI/ASME
Description of ECOLINE GTC/GTF series gate valves, including operating data.
4.6 Lift Check Valves to ANSI/ASME
Description of ECOLINE PTF series lift check valves, including operating data.
4.7 Swing Check Valves to ANSI/ASME
Description of ECOLINE SCC/SCF/SCV series swing check valves, including operating data.
4.8 Strainers to ANSI/ASME
Description of ECOLINE FYC/FYF series strainers, including operating data.
Installation at Site
5.1 General Information and Safety Regulations
Ensures authorized personnel perform installation; highlights risks of errors.
5.2 Installation Position and Location
Guidelines for valve installation position and location, considering flow direction.
5.3 Welding into the Pipeline
Responsibility and safety precautions for welding valves into piping systems.
Commissioning, Start-up, and Shutdown
6.1 Commissioning/Start-up Prerequisites
Requirements before commissioning, including data compliance and cleaning.
6.2 Shutdown
Measures to be taken during prolonged shutdown periods for fluid and piping integrity.
Servicing and Maintenance
7.1 Safety Regulations
Safety guidelines for maintenance personnel, including depressurization and cooling.
7.2 Maintenance
Information on maintenance-free design and extending service life through checks.
Trouble-shooting
Common Problems and Solutions
Table listing common valve problems, their causes, and recommended remedies.
EU Declaration of Conformity
Declaration for ECOLINE FYF, GLF, GLB, GTF, GTB, PTF, SCF
EU Declaration of Conformity for specific ECOLINE valve models and strainers.
Declaration for ECOLINE GTC, GLC, SCC, GLF, GTF, SCF, PTF
EU Declaration of Conformity for specific ECOLINE valve models.
Declaration for ECOLINE FYC
EU Declaration of Conformity for ECOLINE FYC strainers.
Declaration for ECOLINE GLV, GTV, SCV
EU Declaration of Conformity for ECOLINE GLV, GTV, SCV gate and globe valves.
Declaration for ECOLINE GLB 150-600
EU Declaration of Conformity for ECOLINE GLB 150-600 globe valves.
Need help?
Do you have a question about the ECOLINE GTC and is the answer not in the manual?
Questions and answers