Table of Contents
Advertisement
DOCUMENTATION
PAN BEAM SERIES OPERATING AND INSTALLATION MANUAL
PB 04, PB 08, PB 16, PB 24, PB 32, PB 40, PB 224, PB 248, PB 272, PB 296
PAN BEAM -
ACTIVE DSP COLUMN SPEAKER
PURE ACOUSTICS
Shapely.
Versatile.
Functional.
Read the operating manual carefully prior to putting the device into operation.
The operating manual is to be kept in a safe place.
Pan Acoustics GmbH │ Lindener Str. 15 │ D-38300 Wolfenbüttel │ Germany │ Tel.: +49 (0) 5331 900 95 70 │ Email: kontakt@pan-acoustics.de
V 1.1
www.pan-acoustics.de
Advertisement
Table of Contents
Related Manuals for Pan Acoustics PB 224
Summarization of Contents
Introduction
Symbols and Explanation
Explains hazard symbols and their meaning to indicate risk levels.
General Information and Target Group
Defines the manual's scope, target audience, and manufacturer's rights.
General Safety Regulations
Outlines essential safety precautions for device operation and handling.
Safety Instructions
Provides guidance on product safety, inspection, and conditions impairing safe operation.
Setup Location
Specifies environmental requirements and acclimatization for optimal device placement.
Scope of Delivery
Refers to the appendix for a detailed list of items included with the speakers.
Definitions
Lists and defines key technical terms relevant to Pan Beam products and technologies.
Product Description
Pan Beam Overview
Introduces the Pan Beam series active column speakers and their core features.
Beam Steering Technology
Explains the electronic beam steering capabilities for vertical and horizontal sound control.
Multi Beam Steering Technology
Details the capability to generate multiple sound beams for precise audio distribution.
Side Lobe Optimization
Describes the DSP function to minimize sound artifacts from side lobes.
Connections
Connector Panel PB 04-40 (Analog/AES/EBU)
Details the rear panel connectors for specific Pan Beam models with analog/digital audio.
Connector Panel PB 04-40 (DANTE)
Details the rear panel connectors for specific Pan Beam models with DANTE networking.
Connector Panel PB 224 (Analog/AES/EBU)
Details the rear panel connectors for the PB 224 model with analog/digital audio.
Connector Panel PB 224 (DANTE)
Details the rear panel connectors for the PB 224 model with DANTE networking.
Commissioning
Electrical Connections
Guidance on connecting power supply and audio signals to the speakers.
Mounting Multi-Module Speakers
Illustrates the mechanical connection procedure for assembling multiple speaker modules.
Cascading Speaker Columns
Explains how to link multiple speaker columns using Pan Beam Setup software.
Error Description and Support
Service and Repair
States that service and repair must be performed by authorized and instructed personnel.
Maintenance Measures
Details regular maintenance tasks including cleaning and visual/functional inspection.
EC Conformity and Disposal
Information on EC conformity declaration and WEEE disposal guidelines.
Contact Information
Provides contact details for Pan Acoustics GmbH for technical support and inquiries.
Appendix
Pan Beam Net RJ45 Pin Configuration
Details the pin assignments for the RJ45 connectors used in the Pan Beam Net.
Alarm Contact (Alarm Loop)
Explains the alarm contact function and how to create a functional alarm loop.
Control via Media Controller
Describes how to control Pan Beam speakers using external media controllers.
Pan Beam Net Control
Details activating presets via RS485 interface using media controllers.
Crestron Integration
Mentions the availability of Crestron modules for media controller integration.
Crestron Interface Configuration
Lists serial communication parameters required for Crestron integration.
DANTE Setup and Routing
Explains DANTE network setup requirements and audio routing procedures.
DANTE Device Configuration
Details how to configure device settings like sample rate, encoding, and latency.
DANTE Network Configuration
Describes DANTE network modes, including switched and redundant configurations.
DANTE Status Monitoring
Explains how to view device, firmware, and network status information via the Status tab.
DANTE Cascading
Details connecting additional Pan Beam speakers via the Pan Beam Net-Link interface.
DANTE Media Controller Commands
Provides commands for activating saved presets via UDP over the DANTE network.
DANTE Alarm Contact Monitoring
Explains monitoring alarm contact status via GPI on a media controller.
Pan Con Interface
Describes the Pan Con interface, its connectors, and status indicators.
Pan Splitter 4/4 Interface
Details the Pan Splitter 4/4 interface, its connectors, and LED indicators.
Pan Splitter 2/6 Interface
Details the Pan Splitter 2/6 interface, its connectors, and LED indicators.
Pan Beam Net
Pan Beam Net Configuration
Explains the Pan Beam Net line bus system and required cabling for connectivity.
Pan Con Cabling Examples
Illustrates cabling examples for the Pan Con interface within a Pan Beam network.
Pan Splitter 2/6 Cabling Example
Depicts a cabling example for setting up the Pan Splitter 2/6 in a network.
Pan Splitter 2/6 Cabling (Alarm Contact)
Shows Pan Splitter 2/6 cabling including the integration of the alarm contact function.
Pan Splitter 4/4 Cabling Example
Illustrates a cabling example for setting up the Pan Splitter 4/4 in a network.
Pan Splitter 4/4 Cabling (Alarm Contact)
Shows Pan Splitter 4/4 cabling including the integration of the alarm contact function.
Scope of Delivery and Accessories
General Delivery Scope
Lists the standard components included with Pan Beam series speakers.
PB 04 & PB 08 Delivery Scopes
Details the delivery contents for PB 04 and PB 08 modules and variants.
PB 16 Delivery Scopes
Details the delivery contents for PB 16 modules and variants.
PB 24 Delivery Scopes
Details the delivery contents for PB 24 modules and variants.
PB 32 & PB 40 Delivery Scopes
Details the delivery contents for PB 32 and PB 40 modules and variants.
PB 224 & PB 248 Delivery Scopes
Details the delivery contents for PB 224 and PB 248 modules and variants.
PB 272 Delivery Scopes
Details the delivery contents for PB 272 modules and variants.
PB 296 Delivery Scopes
Details the delivery contents for PB 296 modules and variants.
Pan Net Interface Examples
Illustrates examples of Pan Net interfaces including Pan Con and Splitters.
Mounting Brackets and Accessories
Showcases various mounting brackets, plates, and other accessories for Pan Beam speakers.
Need help?
Do you have a question about the PB 224 and is the answer not in the manual?
Questions and answers