Summary of Contents for Pan Acoustics PAN EVAC Series
Page 1
Pan Acoustics reserves the right to modify products without prior notice. www.pan-acoustics.de SINCE 2002 Pan Acoustics GmbH │ Schweigerstr. 13d │ D-38302 Wolfenbüttel │ Germany │ Tel.: +49 (0) 5331 900 95 70 │ E-mail: contact@pan-acoustics.de Page 1 of 16...
Page 2
If the product is resold, the document must be handed over to the new owner in printed or electronic form. Pan Acoustics reserves the right to change/update the document without prior notice. The latest version of this document can be downloaded from the Pan Acoustics website.
The loudspeakers of the Pan EVAC series conform to protection class IP 54 and are therefore also suited for outdoor applications. The loudspeakers P 04-EN54 and P 08-EN54 from the Pan EVAC series have been tested for ball impact resistance and can be used in sports environments.
Page 5
The base surface is to be checked for suitability of installation and, where required, prepared by qualifi ed personnel. • the connections and components delivered by Pan Acoustics or expressly mentioned in this manual are to be used. •...
Manual 5. Safety instructions All products from Pan Acoustics are developed and manufactured in Germany according to the latest safety regulations. Each product is thoroughly inspected prior to shipping according to in-house quality guidelines. The device conforms to the current CE regulations for operation in residential, business, commercial and industrial areas.
CONNECTION OF THE LOUDSPEAKER AND MOUNT • All mounts sourced via Pan Acoustics for the Pan EVAC EN 54 are delivered with suitable instal- lation material for connection with the loudspeaker. • The connection between the loudspeaker and the mount is made by a fi xing point (e.g. a slot nut, which is inserted into the rear slot of the loudspeaker and tightened with two M6 set screws).
Manual 8.2. Electrical connection The loudspeakers from the Pan EVAC series with an EN 54-24 option are passive 100 V systems. An external amplifi er is required to operate them. These systems have identical connections for the feed cable. The rated power can be adjusted via an internal switch.