Table of Contents
Advertisement
TrynEx International, LLC, 531 Ajax Drive, Madison Heights, MI 48071-2429 • www.snowexproducts.com
April 1, 2016
Lit. No. 70440, Rev. 00
Bulk Pro™ 1575, Bulk Pro 1875
Low-Profi le Tailgate Spreader
SP-1575-1, SP-1875-1
Owner's Manual
CAUTION
Read this manual before installing or operating
the spreader.
This manual is for SnowEx
Bulk Pro spreaders with serial numbers
®
beginning with 160501 and higher.
This document supersedes all editions with an earlier date.
Advertisement
Table of Contents
Related Manuals for SnowEx Bulk Pro 1875
Summarization of Contents
Introduction to SnowEx Spreaders
Warranty Registration Process
Instructions for registering your spreader warranty online or via mail.
Safety Information for Spreader Operation
Safety Definitions and Warning Labels
Defines safety terms (WARNING, CAUTION) and discusses warning labels on the spreader.
Serial Number Label Identification
Details the format and meaning of the spreader's serial number for identification.
General Safety Precautions
Lists essential safety measures to prevent injury and damage during operation and service.
Personal Safety Guidelines
Provides guidelines for personal safety, including clothing, eye protection, and handling hot surfaces.
Hazardous Conditions and Precautions
Covers fire/explosion risks, cell phone use, ventilation, fuses, battery safety, noise, and vibration.
Loading the Spreader
Vehicle Certification Requirements
Details vehicle certification requirements for spreader installation and compliance with FMVSS.
Approximate Material Weights
Provides a chart of material densities and guidance on calculating load weights to avoid overloading.
Mounting the Spreader
Model 1875 Spreader Mounting
Information on mounting the Model 1875 spreader, including separate mount kits.
Model 1575 Spreader Mounting
Instructions for switching the Model 1575 spreader between 3-point and truck mount positions.
License Plate Installation
Instructions for installing the license plate using screws and locknuts.
Operating the Spreader
Driving and Spreading on Snow and Ice
Provides tips and cautions for operating the spreader in winter driving conditions.
Cab Control Power and Start-Up
Covers powering the cab control, initial checks, and starting/stopping the spreader.
Material Application Adjustment
Details how to adjust material application rate and spinner width using control knobs.
Cab Control Modes and Error Handling
Explains spreader operating modes and how to interpret and resolve error codes.
Cab Control Codes Reference
Reference for setup, information, and error codes displayed on the cab control.
Cab Control Setup Procedures
Guides for calibrating the hopper, clearing data, and adjusting LED brightness.
Advanced Spreader Features and Tips
Discusses auto-reverse, vibrator, flow control, and practical spreading advice.
Maintenance Procedures
Lubrication Schedule and Guidelines
Recommendations for lubricating bearings and pivot assemblies for smooth operation.
Post-Use Cleaning and Storage
Procedures for cleaning, drying, and storing the spreader after use and at season's end.
Fuse Replacement Guide
Guidance on replacing fuses, emphasizing the use of correct type and amperage.
Harness Wiring Diagram
Electrical Wiring Diagram and Components
Illustrates the electrical wiring system, connectors, and spreader module connections.
Troubleshooting Guide
Control and Operation Issue Diagnosis
Addresses problems like no power, control shutdown, speed issues, and spreader non-operation.
Flow and Component Issue Diagnosis
Helps diagnose issues with motor function, material flow, and vibrator operation.
Need help?
Do you have a question about the Bulk Pro 1875 and is the answer not in the manual?
Questions and answers