32. Enter the command: ifdown ethX
NOTE: The X in ethX should be the number corresponding to the NIC you are
working with.
33. Enter the command: rmmod eepro100
34. Enter the command: ifup ethX
NOTE: The X in ethX should be the number corresponding to the NIC you are
working with.
35. Enter the command: /etc/rc.d/init.d/network restart
36. Confirm that the driver listed in "lsmod" is e100
37. Run ifconfig ethX, and try to ping the address assigned to this adapter to verify
that the interface is working correctly, followed by a ping to another device on the
network.
38. Installation of Red Hat Linux 8.0 Professional is complete.
On-Line Information and Software Sources
Red Hat Inc., web access: http://www.redhat.com
HP web access: http://www.hp.com
6