Table of Contents
Troubleshooting
Related Manuals for Meiko UPster U 500S
Summarization of Contents
Introduction and General Instructions
Storage
Instructions for storing the operating manual for easy access.
Name and Address of Manufacturer
Contact details for MEIKO Maschinenbau GmbH & Co. KG.
Authorisations for Service Partners' Service Technicians
MEIKO exclusively authorizes Service Partners for commissioning, repairs, etc.
Designation of Machine Type
Information for identifying the machine model and serial number for queries.
General Safety Instructions
Operator's Duty of Care
Outlines the operator's responsibilities for ensuring safe machine operation.
Basic Safety Measures
Details fundamental safety precautions for machine use and maintenance.
Delivery, Transport, Installation, and Assembly
Delivery
Procedures for checking and handling the machine upon delivery.
Transport, Installation, and Assembly
Guidelines for safe transportation, installation, and assembly of the appliance.
Operating Conditions
Specifies the necessary environmental and site conditions for operation.
Requirements for the Electrical Connection
Details the electrical connection requirements and safety measures.
Requirements for the Fresh Water Connection
Outlines the necessary specifications for connecting the fresh water supply.
Requirements for the Waste Water Connection
Specifies the requirements for connecting the waste water drainage.
Emergency-Off
Instructions on how to perform an emergency shutdown of the machine.
Chemicals for Operating the Machine
Guidance on suitable detergents and rinse aids for the machine.
Instructions for Disposal of Packing Material
Information on how to properly dispose of packing materials.
Settings for Initial Commissioning by Service Engineer
Commissioning
Details the checks and procedures for initial commissioning by a service engineer.
Washing Using the Washing Machine
Operating Panel
Describes the functions and layout of the machine's operating panel.
Preparation for Washing and Rinsing
Steps to prepare the machine and baskets before starting a wash cycle.
Manual Dosing of Detergent
Instructions for manually adding detergent if automatic dosing is not used.
Automatic Dosing
Explains the automatic addition of detergent and rinse aid.
Operation During Washing and Rinsing Cycle
Principles for correctly loading items into baskets for optimal washing.
Maintenance and Care
Care, General
General advice on keeping the machine in good condition.
Refill Detergent
Instructions for refilling the detergent containers.
Refilling with Rinse Aid
Instructions for refilling the rinse aid containers.
Cleaning
Detailed steps for cleaning the warewashing machine.
Care of Stainless Steel Surfaces
Guidance on cleaning and maintaining stainless steel parts.
De-scaling
Procedures for removing limescale deposits from the machine.
Appliance with Built-in Water Softening Device EW10
General
General information about the integrated water softening device.
Adjustment of Water Hardness
How to adjust the water softening device based on local water hardness.
Capacity of the Built-in Water Softening Device
Details on the capacity and performance of the water softener.
Regeneration
Steps for regenerating the water softening device.
Basic Information About the Warewashing Machine
General Description of the Warewashing Machine
Overview of the machine's washing principles and features.
Noise Emission
Specifies the noise level of the appliance.
Electrical and Hydraulic Equipment Data
Refers to technical data sheets for electrical and hydraulic specifications.
Dimensions, Technical Data, Installation Instructions
Refers to technical data sheets for dimensions and installation.
Settings / Modifications / On-site Adaptation
Using the Keyboard for Programming
Guide to using the keyboard for navigating and programming settings.
Code Input
Instructions for entering access codes to modify machine settings.
Service Level
Accessing service parameters, viewing/modifying data, ventilation, reset functions, and configuration levels.
Parameter List
A comprehensive list of machine parameters, their ranges, and settings.
Assignment List: View Inputs / Control Outputs
List mapping internal signals (inputs/outputs) to their display and function.
Rinse Programmes Parameter Update
Table detailing target values for rinse programs.
Operating Errors
Information Reporting and Troubleshooting
Explains how information codes are displayed and how to troubleshoot them.
Error Messages and Troubleshooting
Details specific error codes and their possible causes and solutions.
Maintenance and Servicing
Basic Safety Measures During Normal Operation
Safety precautions to be observed before and during maintenance work.
Before Putting Back into Operation Following Maintenance or Repair Work
Initial tests required before restarting the machine after maintenance.
Observe Environmental Protection Regulations
Guidelines for handling and disposing of materials during maintenance.
Dosing Equipment
Information on the maintenance and care of dosing units.
Change of Products
Procedures when changing detergent or rinse aid products.
Maintenance Plan
Notes on who should perform maintenance and the importance of a plan.
Need help?
Do you have a question about the UPster U 500S and is the answer not in the manual?
Questions and answers