Overclock Running - Intel 630 - Pentium 4 630 3.0GHz 800MHz 2MB Socket 775 CPU User Manual

2-3-4 Over clock Running
WARNING! This section is for experienced motherboard installer only. Over
clocking can result in system instability or even shortening life of
the processor.
After setting the Jumper JP2 you can choose over clock running by BIOS CMOS
SETUP UTILITY. When you entered CMOS SETUP UTILITY, choose "Frequency/
Voltage control" you will see the screen as below then.
1. You can choose the situation you want to try.
CPU/SDRAM (MHz)
66/66
66/100
100/100
100/133
133/100
133/133
CMOS Setup Utility - Copyright (C) 1984-2000 Award Software
Cyrix III Clock Ratio
1-2 3-4 5-6
OFF OFF OFF
OFF OFF OFF
ON OFF OFF
ON OFF ON
ON ON OFF
ON ON ON
Frequency/Voltage Control
Default
13
7-8
ON
OFF
OFF
OFF
OFF
OFF
Item Help