Table of Contents
Advertisement
Preview Screen
Click the "Preview" button ( ) to display a preview image on the preview screen. Specify the scanning area on
this screen following the steps shown below.
If the variation preview screen is displayed, switch to the preview screen by clicking the "Preview Screen" button (
Setting the Scanning Area
1 1 1 1
Click the "Preview" button ( ) to preview the
document.
A preview image will appear on the preview screen.
2 2 2 2
Move the mouse cursor onto the preview image.
3 3 3 3
Click a scan starting point on the image.
Keep pressing the mouse button when selecting the area you
want to scan.
4 4 4 4
Drag the cursor to the bottom-right of the screen.
The area to be scanned will be indicated by a rectangular
shaped broken line. This area becomes the scanning area.
5 5 5 5
After selecting the scanning area, release the
mouse button.
To cancel the selected area to be scanned, click a spot
outside the scanning area or double-click a spot inside
the area.
Scanning
).
Altering the scanning area
The (
) symbol will appear when
the cursor is placed on the left or
right border of the scanning area.
On the other hand, the (
) symbol
will appear when the cursor is
placed on the top or bottom border
of the scanning area. By dragging
any of the four corners of the image,
a ( , ) symbol will appear. The size
of the image will be maximized or
minimized according to the direction
in which the symbol is moved.
Moving the scanning area
The (
) symbol will appear when
the cursor is placed within the
scanning area after the area being
specified by dragging. Move the
image to adjust the scanning area.
Displays the colour mode,
resolution, and size of the data.
45
Advertisement
Table of Contents
