Table of Contents
Advertisement
"Standard Mode Setting" Dialog Box
Click the "Standard Mode Setting" button to display the dialog box shown below.
On this dialog, you can change the preferences of four buttons including "Monitor", "Photo", "FAX", and "OCR"
on the "Standard" screen. Select the corresponding tab to change the desired preferences.
Colour Mode
Click the ( ) button to select the desired colour mode from "Full Colour",
"256 Colour", "Greyscale", "Mono Diffusion", and "Mono 2 gradation".
Reference:
Refer to the
Colour Mode
Resolution
Click the ( ) button to select the desired resolution from "75", "150", "300",
and "600" or input the required figure into the box (50dpi - 600dpi).
Auto Threshold
When "Mono 2 gradation" is selected for "Colour Mode" setting, check this
option to automatically set the threshold setting to the most appropriate
setting.
"OK" button
Click to save each of the changed settings.
"Cancel" button
Click to close without saving the changed settings.
for details on each setting.
Scanning
44
Advertisement
Table of Contents
