Advertisement

IDRO FIRMWARE
Installed on:
 STAR 14 – STAR 14 Sartoriale
 DIVA
 DIVA MID
 DIVA PLUS
 MAGNIFIKA
 PELLET FIRE PLACE 18
 BI-FIRE MID
 BI-FIRE
Updated on 02/07/13 – Rev. 2.5
with LED display
TECHNICAL MANUAL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DIVA MID and is the answer not in the manual?

Questions and answers

Summarization of Contents

General Description
Console
Displays the equipment's functioning state and available settings via different displays and menu access.
What are the buttons for
Explains the function of each button on the control panel and their actions in different modes.
Operative Mode
Stove Ignition
Explains the process of igniting the stove using the control panel buttons.
No Stove Ignition
Describes the "NO FIRE" alarm state and potential causes for ignition failure.
Stove Working
Details the normal functioning mode after successful ignition and pump activation.
Modification of DHW and water temperature setting
Guides on modifying domestic hot water and boiler water temperature settings via the console.
Temperature Probes
Room/Water Temperature Probe
Details the features, measuring field, and fault checking for the room/water temperature probe.
Pellet Flue Gas Temperature Probe
Describes the features and fault checking for the pellet flue gas temperature probe.
Wood Flue Gas Temperature Probe
Outlines the features and fault checking for the wood flue gas temperature probe.
Functioning Principle
Ignition Cycle
Details the three phases of the ignition cycle: FUN ASP, LOAD PELL, and FIRE ON.
Work Phase
Describes the normal operation, power modulation, and conditions for switching on/off.
DHW Power Work Phase
Explains the production of domestic hot water and the "SANI" function.
Work Phase with Open Room Thermostat Contact
Details operation when the room thermostat contact is open, entering "ECO TOFF" mode.
BI-FIRE MID and BI-FIRE Functioning Principle
Explains how the stove functions with pellet, wood, or both combustion chambers.
Bootloader Programmer
Firmware Loading in Power Board
Step-by-step instructions for loading firmware onto the power board using the bootloader.
Database
DATABASE Access Keys
Lists the access keys for loading specific "Database" settings for different stove models.
Power Board Calibrations
Calibrations Access Keys Reserved to T.A.C. Table
Lists access keys for technical menus related to general, pre-load, ventilation, and flue gas calibrations.
How to Calibrate Parameters
Provides a step-by-step guide on calibrating parameters using the console.
How to Calibrate Pellet Flue Gas Probe
Details the procedure for calibrating the pellet flue gas probe.
Wiring Diagrams
DIVA - STAR14 Wiring Diagram
Shows the wiring diagram for the DIVA - STAR14 model, including motherboard 1023.
DIVA MID – DIVA PLUS Wiring Diagram
Presents the wiring diagram for DIVA MID and DIVA PLUS models, using motherboard 1023.
MAGNIFIKA Wiring Diagram
Details the wiring diagram for the MAGNIFIKA model, based on motherboard 1023.
PELLET FIRE PLACE 18 Wiring Diagram
Illustrates the wiring diagram for the PELLET FIRE PLACE 18 model, using motherboard 1023.
BI-FIRE MID – BI-FIRE Wiring Diagram
Provides the wiring diagram for BI-FIRE MID and BI-FIRE models, based on motherboard 1023.

Table of Contents

Save PDF