Names And Functions Of Components - Canon 1692B002 Service Manual

Chapter 1
Compliant with ANSI/EIA/TIA-568A or ANSI/EIA/TIA-568B
(5) Interface connector
Printer side: Compliant with IEEE802.3, ANSI X3.263, ISO/IEC60603-7
c. IEEE1394 (option)
(1) Interface type
Interface compliant with IEEE1394-1995, P1394a (Version 2.0)
(2) Data transfer system
Asynchronous transfer
(3) Signal level
Input:
Differential input voltage:
During S100 settlement: +173 mV to +260 mV
During data reception: +142 mV to +260 mV
During S200 settlement: +171 mV to +262 mV
During data reception: +132 mV to +260 mV
During S400 settlement: +168 mV to +265 mV
During data reception: +118 mV to +260 mV
Output:
Differential output voltage: +172 mV to +265 mV
(4) Interface cable
Twisted-pair shielded cable, 4.5 m max.
Compliant with IEEE1394-1995 standard or P1394a (Version 2.0) standard
(5) Interface connector
Printer side: 6-pin connector (socket) compliant with IEEE1394 standard
Cable side: 6-pin connector (plug) compliant with IEEE1394 standard
Cable side: RJ-45 type compliant with ANSI/EIA/TIA-568A or ANSI/EIA/TIA-568B

1.5 Names and Functions of Components

1.5.1 Front
[1] Upper cover
[2] Delivery guides
[3] Roll holder
[4] Delivery support
[5] Ink tank cover
[6] Operation panel
[7] Release lever
[8] Stand
[9] Basket
[10] Media take-up unit
1-6
[5]
[2]
[3]
[4]
[9]
Open this cover to install a printhead, load media or clear jammed paper inside the printer.
Allow printed paper to be delivered. Open these guides to load a roll.
Load a roll on this holder.
Keeps printed paper from being caught by the roll holder or in the paper slot.
Open this cover to replace the ink tank.
Use this panel to operate the printer and check its status.
Releases the paper retainer. Pull up this lever to front of the printer to load paper.
The base on which the printer mounts, furnished with casters.
Cloth tray that catches the printed paper.
Takes up printed rolls automatically.
[1]
[5]
[10]
[8]
F-1-9
T-1-3
[6]
[7]
0014-8828