Download Print this page
TP-Link TL-ANT5830MD Installation Manual

TP-Link TL-ANT5830MD Installation Manual

2x2 mimo dish antenna

Advertisement

Installation Guide
2x2 MIMO Dish Antenna
Model: TL-ANT2424MD & TL-ANT5830MD

Advertisement

loading
Need help?

Need help?

Do you have a question about the TL-ANT5830MD and is the answer not in the manual?

Questions and answers

Summarization of Contents

Antenna Specifications
Electrical Specifications
Lists frequency range, gain, VSWR, beamwidth, F/B ratio, polarization, impedance, and connector types.
Mechanical Specifications
Details antenna dimensions, weight, rated wind velocity, and mounting type.
Safety and Package Information
Safety Notice
Outlines essential safety warnings for antenna installation and use, emphasizing precautions during storms.
Package Contents
Lists all items included in the TL-ANT5830MD package and notes differences for TL-ANT2424MD.
Installation Preparation
Installation Requirements
Lists the necessary tools and equipment, such as a wireless Base Station and screwdrivers, for installation.
Hardware Overview
Illustrates the main physical components of the antenna assembly for identification.
Hardware Installation Steps
Step 1: Secure Antenna Feed
Instructions for attaching the Antenna Feed to the Dish Reflector using M4 bolts.
Step 2: Connect RF Cables to Feed
Guide for connecting RF Cables to the Antenna Feed, with a note for TL-ANT2424MD.
Step 3: Attach Base Station
Instructions for mounting the Base Station to the mounting bracket on the reflector.
Step 4: Connect RF Cables to Base Station
Guide for connecting the other ends of the RF Cables to the Base Station.
Step 5: Attach Elevation Rod
Instructions for attaching the Elevation Rod to the Antenna-mount Bracket.
Step 6: Attach Pole Mounting Bolts
Instructions for attaching M10x150 Carriage Bolt Assemblies to the bracket for pole mounting.
Step 7: Attach Dish Reflector
Instructions for securing the Dish Reflector to the Elevation Rod and bracket.
Step 8: Mount Antenna Assembly to Pole
Instructions for mounting the entire antenna assembly to a pole using clamps and bolts.
Step 9: Adjust Antenna Angles
Guide for adjusting azimuth and elevation angles for optimal signal strength.
Step 10: Slide Protective Shroud
Instructions for sliding the Protective Shroud over the Base Station until it locks.