Setting The Function Rename; Setting The Component In Assign - Denon AVR-886 Operating Instructions Manual

Advanced Setup – Part 1

Setting the Function Rename

The names of the input sources displayed on the front display
and the on screen display can be changed. The names or brands
of the devices connected to the input sources can be input.
1 CURSOR D D H H
Press the or
"Function Rename" at the "Input Setup" menu,
ENTER
then press the button.
• The "Function Rename" screen appears.
2
CURSOR D D H H
Press the or button to select the
input source whose name you want to change,
CURSOR F F G G
then press the or
• The screen switches to the character input screen.
Example:
When "CD" is selected and the CURSOR F F or G G button
is pressed
3
CURSOR F F G G
Press the or button to move the
cursor ( 2 2 ) to the character, number, symbol or
punctuation mark you wish to input, and press
CURSOR D D H H
the or button to select that
character.
A B C D E F G H I J K L M N O P Q R S T U V W X Y
Z a b c d e f g h i j k l m n o p q r s t u v w x y z
0 1 2 3 4 5 6 7 8 9
' ( ) + , – . / : ; < = > ? [ ] (space)
Up to 5 characters can be input.
4 Repeat step 3 to complete input of the input
source name.
If you wish to return the input source to its initial setting,
press the CURSOR H H button while the input source is
button to select
highlighted.
If "Yes" is selected for "Default", the setting is automatically
reset to the default name.
5
Once all the characters have been input, press
ENTER
the
• The "Function Rename" screen appears.
button.
Use the same procedure to change other input source
names as well.
6
Press the
• The "Input Setup" menu appears.
• When the input source is selected, the display is as shown
below.
Example:
When the name has been changed to "DENON"
button.
ENTER
button to enter the setting.
42
ENGLISH
Advanced Setup – Part 1

Setting the Component In Assign.

This setting assigns the color difference (component) video input
terminals of the AVR-886 for the different input sources.
1
CURSOR D D H H
Press the or
"Component In Assign." at the "Input Setup"
ENTER
menu, then press the button.
• The "Component In Assign." screen appears.
2 CURSOR D D H H
Press the or button to select the
component video input terminal, then press the
CURSOR F F G G
or button to select the input
source.
Select "OFF" for sources for which the component (Y,
P /C and P /C ) video input is not to be used.
B B R R
When the default, "Yes", is selected, the settings are reset
to the factory defaults.
3 ENTER
Press the button to enter the setting.
• The "Input Setup" menu appears.
ENGLISH
button to select