Connecting The Pre-Out Terminals; Connecting The Power Supply Cord - Denon AVR-886 Operating Instructions Manual

Connecting Other Sources

Connecting the pre-out terminals

• Use these terminals if you wish to connect external power amplifier(s) to increase the power of
the front, center, surround and surround back sound channels, or for connection to powered
loudspeakers.
• When using only one surround back speaker, connect it to the left channel.

Connecting the power supply cord

NOTE:
• Only use the AC OUTLETS for connecting audio equipment. Never use it for hair driers, TVs
or other electrical appliances.
Power amplifier
B
CENTER
A
SURROUND
L L
L
R R
R
A
SURROUND
BACK
L L
L
R R R
B
SUB-
WOOFER
A
FRONT
L L
L
R R
R
AC outlets (Wall)
AC 120 V, 60 Hz
AC OUTLETS
• SWITCHED (total capacity – 120 W (1 A.))
The power to these outlets is turned on and
off in conjunction with the POWER switch on
the main unit, and when the power is
switched between on and standby from the
remote control unit.
No power is supplied from these outlets
when this unit's power is at standby. Never
connect equipment whose total power
consumption exceeds 120 W (1 A.).
18
ENGLISH
ENGLISH
Connecting Other Sources