Setting The Function Rename; Setting The Component In Assign - Denon AVR-2106 Operating Instructions Manual

ENGLISH
Advanced Setup – Part 1

Setting the Function Rename

The names of the input sources displayed on the front display
and the on-screen display can be changed. The names or brands
of the devices connected to the input sources can be input.
1 CURSOR D D
Press the or
"Function Rename" at the "Input Setup" menu,
ENTER
then press the button.
• The "Function Rename" screen appears.
2 CURSOR D D
Press the or
input source whose name you want to change,
CURSOR F F
then press the
• The screen switches to the character input screen.
Example:
When "CD" is selected and the CURSOR F F or G G button
is pressed
3
CURSOR F F
Press the or
cursor ( 2 2 ) to the character, number, symbol or
punctuation mark you wish to input, and press
CURSOR D D H H
the or
character.
A B C D E F G H I J K L M N O P Q R S T U V W X Y
Z a b c d e f g h i j k l m n o p q r s t u v w x y z
0 1 2 3 4 5 6 7 8 9
' ( ) + , – . / : ; < = > ? [ ] (space)
Up to 5 characters can be input.
4
Repeat step 3 to complete input of the input
source name.
If you wish to return the input source to its initial setting,
press the CURSOR H H button while the input source is
highlighted.
H H
button to select
If "Yes" is selected for "Default", the setting is
automatically reset to the default name.
5
Once all the characters have been input, press
the
H H
button to select the
• The "Function Rename" screen appears.
Use the same procedure to change other input source
G G
or button.
names as well.
6
Press the
• The "Input Setup" menu appears.
• When the input source is selected, the display is as shown
below.
Example:
When the name has been changed to "DENON"
G G
button to move the
button to select that
ENTER
button.
ENTER
button to enter the setting.
37
ENGLISH
Advanced Setup – Part 1

Setting the Component In Assign.

This setting assigns the color difference (component) video input
terminals of the AVR-2106 for the different input sources.
1 CURSOR D D H H
Press the or
"Component In Assign." at the "Input Setup"
ENTER
menu, then press the button.
• The "Component In Assign." screen appears.
2 CURSOR D D H H
Press the or button to select the
component video input terminal, then press the
CURSOR F F G G
or button to select the input
source.
Select "OFF" for sources for which the component (Y,
P /C and P /C ) video input is not to be used.
B B R R
When the default, "Yes", is selected, the settings are reset
to the factory defaults.
3
ENTER
Press the button to enter the setting.
• The "Input Setup" menu appears.
button to select