Related Manuals for ENFORCER SK-1123-SPQ
Summarization of Contents
Quick Installation Guide
Mounting Diagram
Visual guide to physically installing the keypad and back box.
Quick Wiring Diagram
Illustrates electrical connections for basic keypad setup.
Quick Programming Guide
Programming Tips
Provides essential advice for successful keypad programming.
Programming Instructions
Step-by-step guide for basic keypad configuration.
Overview and Indicators
Parts List
Itemized list of components included with the keypad.
LED Indicators and Keypad Sounds
Explains the meaning of LED lights and keypad audio feedback.
Installation Procedure
Important Installation Notes
Critical safety and operational warnings for installation.
Wiring Diagram and Jumpers
Connection Terminals
Details of terminal functions for wiring the keypad.
Jumpers Configuration
Explains the function of internal jumpers, like backlighting.
Sample Applications and Programming Prep
Stand-Alone Door Lock
Example setup for a single door access control system.
Inter-Lock System with Two Keypads
Configuration for two keypads controlling adjacent doors with inter-lock.
Door-Hold-Open Mode
Configuration for doors that should not be held open.
User Authentication Methods
Overview of codes, cards, or combined methods for access.
Security Level Options
Describes the four available security levels for access.
Programming Preparation
User Code Entry Modes
Details auto and manual entry modes for user codes.
Powering Up and Programming Mode
Procedures for powering the unit and entering programming.
Programming Format and Functions
Programming Format
Explains the keypad entry format for programming functions.
List of Programming Functions
A table detailing all programmable functions and their page references.
System Restore and Master Code
System Restore Procedure
How to reset all programming to default values, excluding the master code.
Programming the Master Code
Steps to set or change the master code for programming access.
Super User Code Management
Programming the Super User Code
How to set a super user code for advanced control.
Deleting the Super User Code
Procedure to remove a previously set super user code.
Using the Super User Code
Examples of how to utilize the super user code for output control.
User Code and Output Management
Programming Common User Codes
Setting a single code for multiple users or cards for outputs #1 or #2.
Super User Code Output Control
Using the super user code for output #1 toggle, pause, or enable/disable.
User Codes and Proximity Cards
Programming User Codes and Proximity Cards
General formula for assigning user codes and proximity cards.
Security Level Options
Details the four security levels for card/code access.
User Code and Proximity Card Examples
User IDs and Codes
Information on user ID ranges and code length requirements.
Programming Examples
Demonstrates programming cards, codes, and deletions.
Visitor Code Programming
Visitor Code Setup
How to program temporary codes for visitors with duration limits.
Visitor Code Examples
Practical examples of setting and deleting visitor codes.
Duress Code Configuration
Duress Code Setup
How to program duress codes for silent alarms.
Duress Code IDs and Outputs
Information on assigning duress IDs to specific outputs.
Duress Code Operation and Examples
Duress Code Programming Examples
Demonstrates setting and deleting duress codes.
Operating Duress Codes
Explains how duress codes function during use.
Output Mode and Timing Control
Output Mode Programming
Setting outputs for toggle or timed activation.
Output Timing Configuration
Programming the duration of timed output activations.
Real-Time Clock and Auto-Disable
Programming the Real-Time Clock
Setting the internal clock for time-based functions.
Output #1 Auto-Disable Time
Scheduling when Output #1 is automatically disabled.
Auto-Disable Time Configuration
Setting Auto-Disable Start and End Times
Defining the period during which Output #1 is disabled.
Managing Auto-Disable Time
Examples and methods to clear or pause auto-disable settings.
System Lock-Up and Entry Modes
Wrong-Code System Lock-Up
Configuring lock-up behavior after failed access attempts.
User Code Entry Mode
Selecting between auto and manual entry for user codes.
Keypad and Output Sounds
Keypad Sound Configuration
Enabling or disabling audible feedback for keypad operations.
Output Relay Activation Sounds
Setting audible alerts for output activations.
LED Status and Door Warnings
Center LED Flashing
Configuring the amber LED behavior during standby mode.
Door-Forced-Open Warning
Setting up alerts for doors forced open without authorization.
Door Propped-Open Alerts
Door-Propped-Open Warning
Configuring alerts for doors left open or propped.
Egress Delay and Warning
Egress Button Modes
Defining how the egress button operates (momentary, hold, with/without warning).
Egress Delay Time
Setting a delay before the egress button activates the output.
Egress Operation Examples and DAP
Egress Delay/Warning Examples
Demonstrates programming various egress button behaviors.
Direct Access to Programming (DAP)
Procedure to reset the master code using a special code.
User Operating Guide
Opening the Door
Instructions for users on how to unlock the door using different security levels.
Operating the Egress Button
How users inside the premises can use the egress button.
Need help?
Do you have a question about the SK-1123-SPQ and is the answer not in the manual?
Questions and answers