Denon AVR-5700 Operating Instructions Manual page 27

2
ENTER
3
This completes system setup. Once these settings are made, there is no need to change them unless different AV components are
2
connected or the speakers are repositioned.
After completing system setup
This button can be pressed at any time during the system setup process to complete the process.
1
SYSTEM
SETUP
TITLE
• On-screen display signals
Signals input to the AVR-5700
VIDEO signal input jack (yellow)
1
E
2
A
3
E
4
A
( : Signal : No signal)
A E
( : On-screen signals output
A
NOTES:
• The on-screen display signals are not output from the video signal MONITOR OUT-2 (yellow) or S-Video signal MONITOR OUT-2 jacks.
• The on-screen display signals are not output from the color difference (component) video signal MONITOR OUT jacks.
• For 4 above, the on-screen display signals are output to the VIDEO MONITOR OUT-1 video signal output jack (yellow) if the monitor TV is
not connected to the S-video MONITOR OUT-1 video signal output jack.
Press the ENTER button.
The "Auto Preset Memory" screen appears.
Use the CURSOR button to select "Yes".
"Search" flashes on the screen and searching begins.
"Completed" appears once searching is completed.
The display automatically switches to screen.
At the System Setup Menu, press the SYSTEM SETUP button.
The changed settings are entered and the on-screen display turns off.
2
S-video signal input jack
E
E
A
A
: On-screen signals not output)
E
On-screen display signal output
VIDEO MONITOR OUT-1 video
signal output jack (yellow)
A
A
E
E
S-video MONITOR OUT-1 video
signal output jack
A
E
A
A
27