Denon AVR-5700 Operating Instructions Manual page 21

2
ENTER
3
4
Once "Meters" or "Feet" is selected in step 3, the Delay Time screen appears automatically.
5
6
Switch to the Delay Time screen.
Select the desired unit, meters or feet.
Select (darken) the desired units, "Meters" or "Feet".
Select the speaker to be set.
Set the distance between the center speaker and listening position.
The distance changes in units of 0.1 meters (1 foot) each time the button
is pressed. Select the value closest to the measured distance.
If "Yes" is selected for "Default", the settings are
2
automatically reset to the default values.
Please note that the difference of distance for every speaker should be
15 ft (4.5 m) or less. If you set an invalid distance, a CAUTION notice,
such as screen right will appear. In this case, please relocate the blinking
speaker(s) so that its distance is no larger than the value shown in
highlighted line.
Example: When "Feet" is selected
Example: When the distance is set to 12 feet
for the center speaker (L1)
21