Table of Contents
Advertisement
FRONT AND REAR DEFLECTORS (Standard Equip.) CHAINGUARDS
(Optional Equip. at Extra Cost)
CHAINGUARDS: Front and Rear Chainguards (Optional Equipment) are recommended for higher than normal
usage (100 hours or more per year) and will provide protection from thrown objects with careful operation.
Chainguards must be maintained in good repair by replacing missing or worn sections or by being replaced
when seriously worn or damaged. Figure Asm-R-0295 & Asm-R-0296
RX96 03/09
© 2009 Alamo Group Inc.
ASSEMBLY
Front Chainguard - (FIGURE Asm-R-0295)
Attach
assemblies (1) to the mower with 1/2" x 1-1/4"
bolts(2), Lockwashers (4), and Flatwashers
(3). Then attach Chainguard Brackets, left (10)
and right (9) to mower with 1/2" x 1-1/4" Bolts
(2). Flatwashers (3), and Locknuts (4).
Rear Chainguard- (FIGURE Asm-R-0296)
Attach the right and left Chainguard assemblies
91) to the mower with 1/2" x 1-1/4" Bolts (2),
Flatwashers (3), and Locknuts (4).
Assembly Section 3-8
the
right
and
left
Chainguard
Advertisement
Table of Contents
