Cutting Component Inspection - Alamo RX96 Operator's Manual

• Inspect blades and blade bolts for looseness
and excessive wear. Make sure the mower is
securely blocked up before crawling beneath.
Replace damaged, worn and missing blades as
complete sets to maintain rotary balance during
operation.
• Ensure carrier hub nut is tightened with the
cotter pin inserted and spread.
• Ensure the blade carriers are properly timed to
avoid blade contact during operation. See
instructions to properly time blades in the
Maintenance Section. OPS-R-0041 _B

9.3 Cutting Component Inspection

Inspect blade pan and blade assembly for the following:
OPS-U-0031
RX96 03/09
© 2009 Alamo Group Inc.
OPERATION
Operation Section 4-23