Table of Contents
Advertisement
Do not let the Blades turn when the Mower Deck is raised for any
reason, including clearance or for turning. Raising the Mower deck
exposes the Cutting Blades which creates a potentially serious hazard
and could cause serious injury or even death from objects thrown from
the Blades.
Large, dense, or wet vegetation may need to be
mowed in two or more passes to achieve a uniform
cut. In such conditions, raise the cutting height to
12" or more on the first pass
Then lower the mower to the desired height and
mow the vegetation a second time.
select a mowing pattern that is at a 90 degree angle
to the first pass to reduce streaking for a more
uniform cut. OPS-R-0044
RX96 03/09
© 2009 Alamo Group Inc.
OPERATION
(SRM-07)
.
OPS-R-0043
If possible,
Operation Section 4-37
Advertisement
Table of Contents
