GV-1120B, GV-1240B, GV-1480B GV-Combo B Card (GV-1120B, GV-1240B and GV-1480B) are of GV-Comb Card series, providing one single card solution for 16 video / audio recording and real-time display. Minimum System Requirements Windows XP / Vista / 7 / 8 / Server 2008...
Page 2
Packing List (DVI-Type) 1. GV- Combo B Card x 1 4. Hardware Watchdog Jumper Wire x 1 2. 1-16 DVI-Type Video Cable x 1 5. Software DVD x 1 3. 1-16 DVI-Type Audio Cable x 1 Connecting One GV-Combo B Card (DVI-Type) •...
Page 3
Connecting Two GV-Combo B Cards You can install two GV-Combo B Cards of the same model for up to 32 channels. Master Card is the card with 1-16 channels and Slave Card is that with 17-32 channels. Normally, the card attached to the lower PCI-E slot number will act as Master, and the card attached to the higher PCI-E slot number will act as Slave.
Connecting Hardware Watchdog Insert the Hardware Watchdog Jumper Wire to the 2-pin connectors on the Card and on the motherboard as illustrated below. Ensure the connection is correct; otherwise the hardware watchdog will not work. PC Reset Switch Hardware PWSW Watchdog GV-Combo B Card Motherboard...
After installing the GV-Combo B Card in the computer, insert the software DVD. The DVD will run automatically and an installation window will pop up. Select Install or Remove GeoVision GV-Series Driver, and select Install or Remove GeoVision GV-Series Card Drivers to install card drivers.
Need help?
Do you have a question about the GV-1480B and is the answer not in the manual?
Questions and answers