Setting The Setup Lock; Advanced Setup - Part 2; Speaker Setup Setting The Speaker Config - Denon AVR-1906 Operating Instructions Manual

Advanced Setup – Part 1

Setting the Setup Lock

The system setup settings can be locked so that they cannot be
changed easily.
1 CURSOR D D H H
Press the or
"Setup Lock" at the "Option Setup" menu, then
ENTER
press the button.
• The "Setup Lock" screen appears.
2
CURSOR F F
Press the button to select "ON" to
lock the system setup settings.
3
ENTER
Press the button to finalize the setting
and exit the system setup mode.
• When the setup lock function is activated, the settings listed
below cannot be changed, and "SETUP LOCKED" is displayed
when related buttons are operated.
• System setup settings
• Surround parameter settings
• Tone control settings
• Channel level settings (including test tones)
• To unlock, press the SETUP button again and display the "Setup
Lock" screen, then select "OFF" and press the ENTER button.
• System setup is complete. Once these settings are made,
there is no need to change them unless different AV
components are connected or the speakers are repositioned.
Advanced Setup – Part 2
This Speaker Setup section describes the procedures to make
speaker settings manually (without using the Auto Setup
button to select
function), as well as to make manual changes to settings that
have already been made by the Auto Setup function.
Speaker Setup
Setting the Speaker Config.
The composition of the signals output to each channel and the
frequency response are adjusted automatically according to the
combination of speakers actually being used.
1
Press the
"Speaker Setup" at the "System Setup" menu,
then press the
• The "Speaker Setup" menu appears.
2
Press the
"Speaker Config.", then press the
button.
• The "Speaker Config." screen appears.
CURSOR D D H H
or button to select
ENTER
button.
CURSOR D D H H
or button to select
ENTER
40
ENGLISH
ENTER
CURSOR
3 CURSOR D D H H
Press the or button to select a
CURSOR F F
speaker, then press the
to select a parameter.
Center Sp.
Front Sp.
Subwoofer
Surround Sp.
Surround back Sp.
4
ENTER
Press the button to enter the setting.
• The "Speaker Setup" menu appears.
• Select "Large" or "Small" not according to the actual size of
the speaker but according to the speaker's capacity for playing
low frequency (bass sound below the frequency set for the
Crossover Frequency) signals. If you are unsure, try comparing
the sound at both settings (setting the volume to a level low
enough so as not to damage the speakers) to determine the
proper setting.
ENGLISH
G G
or button