Using The Extended Information Screens - 3Com 005605-00 Manual

number when your computer is turned on or
when it is reset. This is very useful if you are
using your modem with a "dumb terminal" or
know that you need to connect to a specific
bulletin board or listing service.
You can change stored numbers by highlighting
them and then typing the new numbers in their
place. Once you store your numbers, you can
dial them by entering a single command from
Terminal Mode:
(for example: ATDS0, ATDS1, or ATDS2).
Your U.S. Robotics modem comes with one
phone number already stored in Position 0. If
you haven't changed the default, typing
ATDS0 will automatically dial the 3Com BBS.
Once you enter the numbers you wish to store,
click Save to Modem to store them. Click
Exit to return to the Main menu.
U M S
SING ODEM TATION
The last option, Restore Defaults, resets your
modem to factory specifications. This option is
available from many of the screens within
Modem Station.
TIP:
your modem back to factory
specifications. It is a good place to
start when troubleshooting.
Using the Extended
Information Screens
The "Extended Information" screens provide
important and useful information about your
modem.
We devote a separate section to the Extended
Information screens so that we can explain
Restore Defaults will set
67