3Com 005605-00 Manual page 38

NOTE:
If you do not see your
modem listed in the preceding
screen, the Plug and Play installation
was unsuccessful. Please refer to the
"If Plug and Play Does Not Detect
Your Modem" section on
6. Next, click the Diagnostics tab at the top
of the "Modems Properties" screen. Write
down the COM setting for your modem
below. (Your screen may show a different
setting than that shown in the following
screen.) You will need to know this setting
when you install fax/data communications
software. Click OK.
COM Port _______
34
I M I
NTERNAL ODEM NSTALLATION WITH
page 83.
W 95
INDOWS
You are now ready to install the Connections
program group and register your modem
online. Turn to "Software Installation"
47) for more information.
(page