3Com 005605-00 Manual page 28

1. Turn off your computer and unplug it from
the electrical outlet.
2. Unplug any peripheral devices (printer,
monitor, keyboard, mouse, etc.) from the
computer.
TIP:
Before you unplug any cords,
label them or make a sketch of how
they are connected. This can be helpful
when you plug them back in later.
CAUTION :
electric shock, make sure your computer
and all peripheral devices are turned off
and unplugged from electrical outlets.
3. Remove the screws from your computer's
cover and then remove the cover, as shown
24
I M
NTERNAL ODEM
To avoid risk of
I W
NSTALLATION WITH INDOWS
in the following diagrams. Your computer
may differ in appearance from these
diagrams, but the basic principle for
removing the cover should be the same.
Refer to your computer manufacturer's
manual if you need further instructions.
95