Related Manuals for SEAL 62 Ultra
Summarization of Contents
Introduction
Statement of Intended Use
Details the intended use of the laminator and its compliance with safety directives.
Liability Statement
Outlines warranty information and potential changes to product design, with user responsibility for modifications.
Technical Specifications
Mechanical
Provides physical dimensions, shipping dimensions, net weight, shipping weight, and roller construction details.
Process
Details working width, roller line pressure, maximum speed, roll diameter, board thickness, core size, nip settings, and temperature.
Electrical Requirements
Specifies voltage, frequency, and amperage requirements for EU and North American versions of the laminator.
Electrical Specifications
North American Versions
Details plug types (NEMA 5-20R, 6-20R) and circuit breaker requirements for 110V and 230V North American models.
EU Versions
Details plug types (Schuko, BS 1363) and wall receptacle requirements for Mainland Europe and UK EU laminator models.
Installation
Workspace Requirements
Specifies ideal location, ventilation needs, and required clearance around the laminator for optimal operation.
Environment Conditions
Outlines optimal temperature (16-35°C), humidity (70-90%), and clean surroundings for best laminator performance.
Power Supply
Instructs on connecting the laminator to the appropriate grounded power supply, referencing technical specifications.
Unpacking and Set-up
Setting Up the Laminator in 4 Steps
Provides a step-by-step guide for assembling the laminator, including attaching stand legs and support sections.
Laminator Placement
Details requirements for positioning the laminator in its designated workspace on a flat, level surface.
Adjustable Feet
Explains how to adjust the feet to secure the laminator stand firmly on the floor.
Connecting Your Laminator
Provides instructions for connecting the laminator to a grounded outlet, emphasizing safety and avoiding extension cords.
Important Safeguards
Safety Symbols Used on the Laminator
Explains warning symbols for rotating parts and hot surfaces, advising caution to prevent injury.
Emergency Stop-Buttons
Describes the location and function of the two emergency stop buttons for immediate roller rotation halt.
Laminator Features
Description of Parts
Lists and describes the laminator's components, identified by numbers on a diagram, and their functions.
Control Panel
LED Indicator Design
Explains the meaning of the LED indicators for power, heat, and roller direction status on the control panel.
Push Button Design
Details the function of the push buttons for controlling power, heat, and roller direction, including operational notes.
Operating Your Laminator
Motor Control and Roller Rotation
Covers adjusting speed, roller direction (forward/reverse), stopping, and safe operation practices.
Slow-Mode Operation
Explains how to use the foot switch for slow-mode operation and how to transition between modes without stopping.
Roller Stop Conditions
Lists the specific conditions under which the laminator's roller rotation will automatically stop for safety.
Set-up and Operation
Loading Film onto Unwind Shaft
Details the process of removing, loading, and re-inserting unwind shafts with film rolls, emphasizing care.
Loading Unwind Shaft into Laminator
Explains how to correctly place the loaded unwind shaft into the laminator's holders for proper film feeding.
Set-up and Operation
Setting Unwind Brake Tension
Details how to adjust the unwind brake tension for optimal film application and to prevent wrinkles.
Temperature Settings
Guides on selecting the correct temperature settings based on material recommendations and process requirements.
How to Set the Nip
Explains how to determine board thickness and adjust the nip knob for proper roller gap settings for mounting.
Image Guide
Using the Image Guide
Explains how to position and use the image guide for feeding assistance and preventing photo-electric eye interruptions.
Mounting
Mounting Decals onto a Substrate
Guides on preparing and feeding decals onto a substrate for mounting, including nip settings and safety precautions.
Pre-Coating Boards
Preparation
Details the preparation steps for coating substrates with self-adhesive coating before mounting images, including material handling.
Using a ProSEAL™ Mounting Board & Pouch Boards
Using A ProSEAL Mounting Board
Provides instructions for mounting images using ProSEAL Mounting Boards, referencing specific instruction sheets.
Using A ProSEAL Pouch Board
Details mounting and laminating images using ProSEAL Pouch Boards, including board examination and handling.
Cleaning
Cleaning the Laminator
Provides instructions for safely cleaning the laminator exterior with a lint-free cloth and mild solution.
Cleaning the Roller
Details methods for cleaning the rollers using included cleaner, foam board, or isopropyl alcohol for difficult adhesive.
Limited Warranty
FCC Compliance Information
Details FCC compliance for the equipment, including limits for digital devices and potential radio frequency interference.
Need help?
Do you have a question about the 62 Ultra and is the answer not in the manual?
Questions and answers