Mustek PowerMust 2212 Quick Start Manual

Mustek PowerMust 2212 Quick Start Manual

Line interactive ups

Advertisement

Line Interactive UPS
PowerMust 636 (650VA), Line Int.,IEC
PowerMust 848 (850VA), Line Int., IEC
PowerMust 424EG (450VA), Line Int., Schuko
PowerMust 636EG (650VA), Line Int.,Schuko
PowerMust 848EG (850VA), Line Int.,Schuko
PowerMust 1260(1200VA), Line Int., IEC/Schuko
PowerMust 1590(1500VA), Line Int., IEC/Schuko
PowerMust 2212(2200VA), Line Int., IEC/Schuko
Quick Start Guide
EN

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PowerMust 2212 and is the answer not in the manual?

Questions and answers

Summarization of Contents

Warranty & Service Information
Installing the software
Instructions for installing UPS software from CD or download.
Warranty
Manufacturer provides a minimum of 1 year warranty, contact reseller for details.
Problem solving
Check manual, website (FAQ) for troubleshooting. Contact reseller if unresolved.
Service and Maintenance
Contact reseller for service/maintenance during and after warranty.
Installation and Initial Startup
Placement & Storage Conditions
Install UPS in a protected, dust-free area with adequate airflow, away from contaminants.
Connect to Utility and Charge
Plug AC input cord into a grounded outlet and charge for 6 hours before use.
Connect the Loads
Plug loads into UPS output receptacles and turn on the power switch.
Connect LAN cable, Modem or Phone line for Surge Protection
Connect modem/phone line to surge-protected "IN" outlet, then to computer via "OUT".
Connect USB Cable
Connect UPS to PC with USB cable for monitoring software and shutdown functions.
Turn On/Off the Unit
Press the power switch to turn the UPS on or off.

Table of Contents