Map Auto Zoom; Map Data; Show Map Data - Eagle INTELLIMAP 502 C IGPS Installation And Operation Instructions Manual

Map Auto Zoom

This receiver has an auto zoom feature that eliminates much of the but-
ton pushing that other brands of GPS receivers force you to make. It
works in conjunction with the navigation features.
First, start navigation to a waypoint. (See the waypoint section for
more information on navigating to a waypoint.) Then, with the auto
zoom mode on, the unit zooms out until the entire course shows, from
the present position to the destination waypoint. As you travel toward
the destination, the unit automatically begins zooming in — one zoom
range at a time — always keeping the destination on the screen.
To turn this feature on, from the
| |
Z ENT EXIT
OOM

Map Data

This menu lets you turn the map off, if desired (which turns the map
screen into a GPS plotter); turn off or on the pop-up map info boxes;
draw the map boundaries or boxes around the areas of high detail; or
fill land areas with gray. You can also turn on or off Map Overlays,
which display latitude and longitude grid lines or range rings on the
map. This menu lets you select Navionics Maps; for instructions, see
the Navionics Charts entry in this section.
To get to Map Data:
From the Map Page, press

Show Map Data

From the Map Page, press
the
E M
ARTH AP
want, from Off (so the unit operates like a GPS plotter) to High. After
the option is set, press
. Repeat these steps to turn it off.
MENU
Map Data Menu
MENU
selection list, and choose how much detail you
D
ETAIL
repeatedly to return to the page display.
EXIT
M P
AP AGE
|↓ to
M D
AP ATA
|↓ to
M D
AP ATA
77
, press
MENU
| .
ENT
| . Press
ENT ENT
|↓ to
A
UTO
to enter