Find An Intersection - Eagle INTELLIMAP 502 C IGPS Installation And Operation Instructions Manual

Map Page showing results of a street search.
If you want to navigate to the found street at the cursor location, just
press |
MENU ENT

Find an Intersection

You must enter one street in the First Street dialog box and enter the
next street in the Second Street dialog box.
1. From the Map Page, press
Streets Menu appears.
2. You must fill in a street name in the First Street dialog box. Press
to display the Find By Name menu. There are two options: A. You can
spell out the street in the top selection box. Press ↑ or ↓ to change the
first letter, then press → to move the cursor to the next letter and repeat
until the name is correct, then press
to the lower box and pick a street from the selection list. Press
then press ↓ or ↑ to select a street from the list and press
3. The Find Streets menu reappears with the street you're searching for
in the First Street box. (In this example, it's I-35.)
4. Now fill in the second street. Press ↓ to
Find By Name menu appears again. Just like before, there are two op-
tions: A. You can spell out the second street in the top selection box.
Press ↑ or ↓ to change the first letter, then press → to move the cursor
to the next letter and repeat until the name is correct, then press
| . B. Or you can jump down to the lower box and pick the sec-
ENT ENT
ond street from the selection list. Press
lect a street from the list and press
The cursor points to the located street.
| .
EXIT
MENU
|↓ to
F S
IND TREETS
| . B. Or you can jump down
ENT ENT
S
ECOND
, then press ↓ or ↑ to se-
ENT
.
ENT
112
| and the Find
ENT
.
ENT
| and the
S ENT
TREET
ENT
,
ENT