Creda HB48283 Instructions For Installation And Use Manual page 27

CARE AND CLEANING
3. CONTROL PANEL / TRIMS / INNER DOOR PANEL & GLASS
TRIMS
4. REPLACEMENT OF THE OVEN LAMP
MAIN OVEN LAMP
5. HOW TO CLEAN THE LAMP LENS
MAIN OVEN LAMP
(a) Control Panel
Regularly wipe with a clean, damp cloth and polish
with a clean, dry cloth.
(b) Trims
It is advisable to clean the trims regularly to prevent
any build up of soiling which may detract from the
OVEN
appearance of the cooker. The recommended
DOOR
method of cleaning is to wipe over the trims with a
clean, soft cloth wrung out in hot water, or mild non
abrasive cleaner. (If in doubt try the cleaner on a
small area of trim which is not notice able in normal
use), then after wiping with a cloth wrung out in
clear water, dry with a clean, soft cloth.
(c) Inner Door Panels & Glass
Open the door fully. The glass panel may now be
washed. Stubborn stains can be removed by using a
well soaped, fine steel wool soap pad.
DO NOT use scouring pads, or abrasive powder,
which will scratch the glass.
Warning: Before removing lamp lens, please ensure
that the electricity supply to the appliance is
switched off and the appliance is fully cold.
Open the oven door and remove the oven shelves.
Using a thick cloth, grip the lamp lens, unscrew anti-
clockwise and remove the lens.
Carefully unscrew the bulb anti-clockwise. Fit
replacement bulb (15W 300°C SES). Fit replacement
bulb and refit lens.
Warning: Before cleaning lamp lens, please ensure
that the electricity supply to the appliance is
switched off and the appliance is fully cold.
Open the oven door and remove the oven shelves.
Using a thick cloth, grip the lamp lens, unscrew anti-
clockwise and remove.
Clean with a non-abrasive cleansing cream and refit
lamp lens.
DO NOT use scouring pads, or abrasive powder,
which will scratch the glass lens
27