Know Your Timer - Creda HB48283 Instructions For Installation And Use Manual

KNOW YOUR TIMER

Minute Cook End
Time Manual
Minder Period
A
A
U U
T
T
O
O
Minute Cook End
Time Manual
Minder Period
TIMER FUNCTION BUTTONS
Minute Minder
Button
AUTO COOKING PROGRAMME
Cook Period Button
End Time Button
Manual Button
"+" and "–" Buttons
10
CLOCKFACE
The timer incorporates a 24 hour clock.
Ensure the correct time of day is always set, before using you cooker.
PLEASE NOTE THAT THE DISPLAY WILL DIM BETWEEN 22.00
HOURS AND 06.00 HOURS TO PREVENT GLARE.
However, should you operate the timer during these hours the display
will return to normal brightness for a few seconds and then dim again.
SYMBOLS
will light up when you select a Minute Minder Period and will remain
lit for the period set. At the end of the Minute Minder Period, the timer will
emit an audible tone for 2 minutes, the
continue to flash until the Minute Minder function is cancelled.
This "Cookpot" symbol will light up either:–
– When you press the Cook Period Button and set a length of time for an
Auto Cooking Programme. (It will go out again a few seconds after you
release the timer buttons).
– During the actual Cook Period.
"AUTO" will light up:–
– When the timer is first turned on it will flash. (It will go out when a time
of day is set.)
– When an Auto Cooking Programme has been set.
The "Auto" symbol will flash at the end of an Auto Cooking programme to
indicate that the programme has finished.
(When the "Auto" symbol is flashing, to return the oven to Manual
operation, turn the oven controls off, ensure that the correct time of day
is set, and press the "Manual" button twice – The "Auto" symbol will
go out.
Here you can set a time period of up to 23 hours 59 minutes, that will
count down. When it reaches zero, the timer will emit an audible tone.
For Example: If you set 20 minutes, the audible tone will occur 20
minutes later.
Cook Period is the actual length of time for which, the timer will switch
the oven(s) on as part of an "Auto Cooking" programme.
(e.g. If you set 2 hours, the food will be cooked for 2 hours).
The time of day at which you want an "Auto Cooking" programme to end.
For Example: If you set a "Cook Period" for 2 hours, and "End Time" of
11:00. The timer will switch the oven(s) on at 9:00 and turn the oven(s) off
at 11:00. You will hear a audible tone at 11:00, to indicate that the Auto
Cooking Programme has finished.
Notes:
– When setting an Auto Cooking programme you will need to set the
oven controls(s) to the required temperature(s) when you set the timer.
_ If an Auto Cooking programme has been set the oven(s) will only
operate during the pre-programmed time.
Needs to be pressed to cancel an Auto Cooking programme and return
the ovens(s) to Manual operation.
Used to adjust the various timer function settings.
symbol will start to flash and will