Creda HB48283 Instructions For Installation And Use Manual page 13

ELECTRONIC CLOCK & AUTOMATIC
OVEN TIMER OPERATION
Note 1 When cooking automatically the Cook Period can be checked at any
time by simply pressing the Cook Period button.
Note 2 When cooking automatically the End Time can be checked at any time
by simply pressing the End Time button.
b) TO SET TIMER TO SWITCH ON IMMEDIATELY AND OFF AUTOMATICALLY
AFTER A SET COOK PERIOD
Step 1 Check that the correct time of day is set, if not follow instructions for setting the time
of day.
Step 2 Place food onto the correct shelf position in the oven and close the oven door(s).
Step 3 Turn the oven control(s) to the required temperature, and if necessary select the
appropriate oven function.
Cookpot Symbol
Minute Cook End
Time Manual
Minder Period
A
U
T
O
Note: Cookpot symbol disappears
A
U
T
O
A
U
T
O
Minute Cook End
Time Manual
Minder Period
A
U
T
O
Minute Cook End
Time Manual
Minder Period
Step 4 Press & hold in the "Cook Period" button, the display will read 0.00
and the cookpot (
With the Cook Period button still held set the required Cook Period using
the "+" and "–" buttons. Example: 1hr 30 minutes (as shown).
Note: Cook Period is the length of time the food requires to cook.
Step 5 Release all buttons.
The timer display will revert to the time of day with the Auto symbol lit &
Cookpot symbol remaining lit.
At the end of the Cook Period the "Auto" symbol will flash and an
intermittent bleeping sound will be heard.
The bleeping sound will continue for approximately 2 minutes unless
cancelled. The "Auto" symbol will continue to flash until the timer is
returned to Manual operation (see below).
Step 6 Press the manual button to cancel the bleeping.
(If 2 minutes has not elapsed)
Step 7 Turn the oven control(s) to the OFF position.
Step 8 Press the "Manual" button again to return the cooker to Manual
operation. (The Auto symbol will go out).
) symbol will light up.
13