GE Profile PSB42LSRBV Owner's Manual And Installation Instructions page 31

11 INSTALL DOOR PANELS
Install 1/4" Decorative Panels:
• Remove Handles
Open door to 90°. Remove 5 Phillips head
screws from the Fresh Food and Freezer
door handles; retain all screws. Lift off
door handles.
• Install Door Panels
Carefully push the Fresh Food panel in until
it slides into the slot behind the trim. Gently
push to opposite side. Repeat procedure for
upper and lower Freezer panels.
• Reinstall Handles
Reinstall Fresh Food door handle with the
original 5 Phillips head screws. Tighten.
Repeat for Freezer door handle.
NOTE: Ensure that the edge of the handle
does not pinch the door gasket.
• 3/4" Custom Decorative Panels
If you choose to install custom wood
panels, they must be cut to dimensions
shown on pages 23 and 24. The panels
will slide into the frame on the doors
and grille.
IMPORTANT NOTE: Maximum custom panel
thickness must not exceed 1" thick and 70 lb
for Fresh Food door, 30 lb total for Freezer
door and 15 lb for Grille panel.
Installation Instructions
31
Handle
Fresh Food
Refrigerator
Door
3/4" Custom Panel
if Required