Output Level; Pattern (Room); Predelay; Reflection Parameters - Lexicon PCM NATIVE Owner's Manual

Output Level

Output Level controls the amount of post-mix signal emitted onto a channel of output.

Pattern (Room)

Selects a space available in the selected Category (see Category parameter).

Predelay

This is used to add a small amount of delay to a signal before it enters the rever-
berator. This is used to create a little separation between the wet and dry signals,
in turn creating greater clarity in the mix. This delay can also be toggled into
Tempo Mode, causing the delay value to be related to the tempo of the music.

Reflection Parameters

Rfl Delay

Controls the delay time of a reflection. This can be toggled to Tempo Mode,
in which case its delay time will be related to tempo. Note that this parameter
can have different routing configurations, indicated in its name. For example,
if its name appears as "L Rfl Delay" or "L-L Rfl Delay," the signal comes in
from the left and goes out the left. If the name appears as "L-R Rfl Delay," the
signal comes in from the left and goes out the right.

Rfl Gain

Controls the gain of a reflection. The sign of the gain coefficient by be option-
ally inverted. Note that this parameter can have different routing configura-
tions, indicated in its name. For example, if its name appears as "L Rfl Gain"
or "L-L Rfl Gain," the signal comes in from the left and goes out the left. If the
name appears as "L-R Rfl Gain," the signal comes in from the left and goes
out the right.

Rfl Time Mast

This parameter is used to scale all reflection times at once.
47