Off; Multiband; Frequency; Impulse - Lexicon PCM NATIVE Owner's Manual

Reverb bundle

Hide thumbs Also See for PCM NATIVE:

Table of Contents

Off

This mode shows only the algorithm name. It is the

default view for the plug-in and requires the least amount

of CPU cycles.

This display shows the reverb in five frequency bands,

with the lowest frequency in the rear. The image moves

from right to left as it ages.

This display shows the reverb as a more traditional RTA

image, with lower frequencies on the left.

This display shows the signal as a single impulse re-

sponse, The image moves to the left as it ages.

Table of Contents

Do you have a question about the PCM NATIVE and is the answer not in the manual?