Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Leica Roteo 35G
Summarization of Contents
Introduction
Symbols
Defines safety symbols used in the manual.
Trademarks
Lists trademarks and their owners.
Basic Operation
Laser Overview
Details the laser's components and their functions.
Keypad Overview
Explains the buttons and LED indicators on the laser's keypad.
Carrying Case Overview
Lists items included and their placement in the carrying case.
Button Functions
Explains the functions of the CCW/CW and Plus/Minus buttons.
Automatic / Manual Modes
Describes the two operational modes: automatic and manual.
H.I. Alert Mode
Details the H.I. feature to prevent inaccurate readings during disturbances.
Rotation Mode
Explains how to control the rotation speed and position of the beam.
Scanning Mode
Describes how to use scanning mode for better visibility at distance.
Set-up and Applications
Wall Mount Setup
Instructions for attaching and using the wall mount.
Motorized Wall Mount
Details on activating and using the motorized wall mount.
Setup for Manual Slopes
Guides on creating manual slopes for specific applications.
Setup for Full Manual Mode
Steps to set up the laser in full manual mode for tilting planes.
Setup for Semi-Automatic Mode
Steps to set up the laser in semi-automatic mode for manual Y-axis slope.
Setup for Inclined Planes
Guidance on tilting the Roteo for manual slopes on the wall mount.
Setup for Ceiling Work
Instructions for using the wall mount for suspended ceiling installation.
Setup for Layout or Floor Work
Using the laser in laydown or vertical mode for layout and transfer.
Accessories
RC-350 Remote Control
Details the RC-350 remote control, its buttons, and battery.
RRC-350 Receiver/Remote Control
Describes the RRC-350 as a receiver and remote control unit.
R-250 Receiver
Details the R-250 receiver, its functions, and compatibility.
Other Accessories
Mentions laser enhancing glasses and ceiling grid target.
Batteries
Low Battery Indicator
Explains the indicator for low battery status.
Replacing Alkaline Batteries
Step-by-step guide for replacing alkaline batteries.
Rechargeable NiMH Batteries
Instructions for charging and using rechargeable NiMH batteries.
Later Recharging
Details on how to recharge the laser while working.
Check and Adjust
Notes and Responsibilities
User's responsibility for checking and maintaining accuracy.
Checking Level Accuracy
Procedure to check the laser's horizontal accuracy.
Checking Vertical Accuracy
Procedure to check the laser's vertical accuracy.
Adjusting Level Accuracy (X-axis)
Steps to adjust the horizontal accuracy along the X-axis.
Adjusting Level Accuracy (Y-axis)
Steps to adjust the horizontal accuracy along the Y-axis.
Adjusting Vertical Accuracy (Z-axis)
Steps to adjust the vertical accuracy along the Z-axis.
Check Your Work
Recommends double-checking accuracy after adjustments.
Care and Transport
Transport and Shipping Guidelines
Covers field, road, air/sea transport, and battery regulations.
Field Adjustment After Transport
Inspect adjustments after transport.
Storage Recommendations
Product and Battery Storage
Storage guidelines for product and batteries.
Cleaning and Drying
Product and Accessories Cleaning
Instructions for cleaning the product and its accessories.
Damp Products Drying
Procedure for drying damp products and containers.
Cables and Plugs
Care instructions for cables and plugs.
Safety Directions
General Safety Description
General directions to anticipate and avoid operational hazards.
Intended Use
Defines the permitted and adverse uses of the product.
Permitted Use
Specifies acceptable applications and setup methods for the instrument.
Adverse Use
Lists prohibited uses and modifications of the product.
Limits of Use
Details environmental limitations and usage restrictions.
Responsibilities
Defines responsibilities of manufacturer, accessory makers, and person in charge.
Hazards of Use
Highlights risks associated with improper instruction or use.
General Precautions
Covers general safety rules, handling, and electrical precautions.
Accessory Safety
Safety advice when using accessories and securing the setup.
Battery Safety
Precautions for handling, charging, and disposing of batteries.
Operation Safety
Warnings about moving parts and product disposal.
Laser Classification
General Classification
Provides general directions for laser safety standards.
Roteo Laser Product
Classifies the Roteo as a Class 3R laser product.
Class 3R Hazards
Details potential hazards and risk limitations of Class 3R lasers.
Laser Specifications and Warnings
Lists technical data for laser class 3R and associated warnings.
Electromagnetic Compatibility (EMC)
EMC Description
Defines EMC and its importance for product function.
EMC Precautions
Advice on avoiding disturbances caused by EMC.
FCC Statement, Applicable in U.S.
FCC Compliance
Details the equipment's compliance with FCC rules for digital devices.
Need help?
Do you have a question about the Roteo 35G and is the answer not in the manual?
Questions and answers