Control Connections; Connectors - Lexicon PCM 81 - REV User Manual

Footswitch/Foot Controller
One 1/4 inch T/R/S phone jack is provided for 2 momentary footswitches.
Another 1/4 inch T/R/S phone jack is provided for a footpedal (minimum 100
to maximum 10k impedance). Normally open or normally closed momentary
switches are suitable. At power on, the PCM 81 assumes the switch is off. Use
shielded, twisted-pair cable with shield connected to sleeve. See diagram on
page 3.
MIDI
5-pin DIN connectors are provided for MIDI IN, THRU and OUT. Use standard
5-pin DIN MIDI cable assemblies, available from your local dealer.
Signal Mating Connector
L and R Analog
Audio Input
L and R Analog
Audio Output
AES/EBU
Digital Input
AES/EBU
Digital Output
S/PDIF
CP-340 Type II
Consumer Digital
Audio Input and
Output
MIDI In
MIDI Out
MIDI Thru
pin 2 high by convention
Description
XLR A3M Active balanced, pin 2 high
+2dBu min; +20dBu max
at 0dB setting
XLR A3F Active balanced, pin 2 high
-2dBu to +18dBu
at full scale output
XLR A3M Balanced RS-422
pin 2 high
XLR A3F Balanced RS-422
pin 2 high
1/4" EIAJ Consuner Digital
Audio Format
tip high
5-pin DIN Standard MIDI Interface
Product Overview

Control Connections

Connectors

1-5