Table of Contents
Advertisement
OMEGA
™
MACINTOSh
®
You must consult the Software Installation Guide packaged with the software DVD-
ROM packaged with the Omega Studio
recording software and USB setup.
If you haven't already installed the Cubase
software, please do so before continuing on to the next section.
MAC OS
A USB device must initialize itself with the host computer to operate correctly. The
Omega Studio comprises several devices (audio and MIDI) and each of those must be
initialized. Some Mac computers will not recognize all of these devices if the Omega
Studio is powered on (and connected to the USB port) before the computer is turned
on. The simplest way to avoid problems is to either turn on the Omega Studio or con-
nect it to the USB port after the computer is booted. However, there is a way to force a
reinitialization after the computer is running.
1. Make sure you close any applications which are using the Omega Studio.
2. Simultaneously press and hold the Mic 1-2 USB Assign button and the Line 3-4
USB Assign button until the Line 1 and Line 2 LEDs flash., then release
both buttons simultaneously. The blue USB light will flash and after three seconds
the Omega Studio will be properly initialized.
Using Cubase
SOFTWARE SETUP
TM
to ensure the successful installation of the
®
LE 4 and Lexicon
LE 4 with the Lexicon Omega Studio
®
®
TM
Pantheon
plug-in
15
Advertisement
Table of Contents
