Step 3: Install The Hardware; Before You Start - Intel WPC2011BWW - PRO/Wireless 2011B LAN PC Card Quick Installation Manual

Installation Steps
For steps 2 through 7, read the subsection entitled "Before You
Start." Failure to read this subsection could result in the
adapter not functioning in the network.
To install the Intel® PRO/Wireless 2011B LAN Adapter, you
must log onto a computer with an administrative account. If
you log onto the computer with an account that does not have
administrative privileges, the installation fails.
Step 2: Attach the Regulatory Compliance Label
A sheet of peel and stick regulatory compliance labels is
shipped with the adapter. Follow the directions on the sheet
and affix the appropriate label to the adapter.

Step 3: Install the Hardware

Before You Start

If the hardware is already installed, go to step 4.
Notebook Requirements
Installing the Intel® PRO/Wireless 2011B LAN Adapter in a
notebook computer requires the following minimum
configuration:
• 233 MHz Pentium II
• 64 MB RAM
• A CD-ROM drive
• A video card capable of 256 colors
• One of the following operating systems: Microsoft
Windows† 95B, Windows 98, Windows 98 SE, Windows
ME or Windows 2000.
If you are unfamiliar with these terms, check with your
network administrator to make sure that your computer meets
these minimum requirements.
4 Intel® PRO/Wireless 2011B LAN Adapter Quick Installation Guide