Epson C850071 - RIP Station 5000 User Manual page 9

—Enter the name of the device that the RIP Station is connected to: Pro5000.
New Device
This device name appears in the Printer Setup section of the Configuration page.
For TCP/IP networks
4. When you have entered all the information, click Add.
5. With the device name (Pro5000) selected in the Devices list, click OK.
The RIP Station appears in the list of available servers. The first line of the entry displays
the nickname you gave the server, followed by the protocol you chose. The second line
displays the device name.
6. With the device name (Pro5000) selected in the list of Available Servers, click OK to begin
using the software.
T F D
O MODIFY THE IERY OWNLOADER CONFIGURATION
1. To edit information for a RIP Station in the list of available servers, select the RIP Station
by its nickname and click Modify. Edit information in the Modify Server Settings dialog box
as necessary, and click OK when finished.
2. To add a new RIP Station to the list of available servers, click Add. Configure the Add New
Server dialog box as outlined in step 3 through step 5 above.
3. To remove a RIP Station from the list of available servers, select the RIP Station by its
nickname and click Remove; then click Yes in the Remove dialog box.
For IPX/SPX networks
:
Page 9